GridGo
GridGo — Home Backup Power Without the Permanent Installation
Whole-home battery storage systems typically require a licensed electrician, a building permit, a wall-mounted enclosure, and a full electrical subpanel integration. The installation cost frequently runs to several thousand dollars before the battery provides its first kilowatt-hour. And once installed, the system is committed to that location — if you move, you leave a five-thousand-dollar piece of equipment behind.
GridGo is built around a fundamentally different model. It is a complete, self-contained home energy storage system mounted on an integrated dolly. It arrives fully assembled and ready to use. Position it where you need it, plug it in, and it is operational. No permit required. No electrician required for the basic installation. No permanent commitment to a specific location.
That portability means GridGo goes with you when you move. It means you can reposition it within your home as your needs change. And it means you can deploy it as an emergency preparedness measure without the upfront investment and lead time of a permanent installation.
PRODUCT DETAILS
What GridGo Delivers
5.12 kWh of LFP Storage
The GridGo stores 5,120 Wh of usable energy in lithium iron phosphate cells — the same chemistry used in commercial and industrial energy storage systems for its thermal stability, long cycle life, and safety in indoor environments. At typical home essential loads (refrigerator, lighting, internet, phone charging, a few other circuits), 5.12 kWh provides eight to twelve hours of backup coverage — enough to cover most power outages from weather events or utility maintenance.
For homes with higher backup power requirements or for users who want multiple days of coverage during extended outages, additional GridGo units can be connected to scale total capacity up to 10 kWh. The system manages charging and discharging across all connected units automatically.
3,000W Inverter with Automatic Switchover
The integrated 3,000W inverter provides clean 120V AC output and monitors the grid connection continuously. When an outage is detected, the system switches to battery power automatically — typically within a fraction of a second, fast enough that computers and sensitive electronics continue operating without interruption. When grid power is restored, the system switches back and begins recharging automatically.
Wi-Fi Monitoring App
The GridGo connects to a dedicated mobile app via Wi-Fi, giving users real-time visibility into battery state of charge, power flow from any connected solar input, current load power consumption, and system health status. The app sends alerts for any condition requiring attention and maintains a history of power events — outages, solar production, discharge cycles — that helps users understand their energy situation over time.
Solar Ready
The MPPT charge controller accepts solar input in the 120–450V range, covering a wide variety of residential solar panel configurations. The optional solar dolly accessory provides a pre-wired mounting solution for four to eight 400W solar panels, creating a self-contained portable solar-plus-storage system. For homeowners who want true energy independence during extended outages or in areas with unreliable utility service, the GridGo with solar is a practical and affordable solution.
Portable Design
At 250 lbs on an integrated dolly, the GridGo can be repositioned by one or two people without tools. It stores neatly in a garage or utility room and can be moved to a central home location during an extended outage. Unlike permanently mounted systems, it is not left behind when you move — it is an asset you take with you.
Technical Specification
- Mobile Emergency Backup Power for household use mounted on a dolly.
- Wifi-Monitoring app
- Maximum input power: 4000W
- MPPT voltage operating range: 120–450V
- Maximum input voltage: 500VDC.
- Maximum input current: 100A
- Rated energy: 5120Wh.
- Maximum charging voltage: 28.5V.
- Maximum discharge current: 200A.
- Communication: CAN/RS485 comm with inverter.
- MPPT voltage operating range: 120–450V
- Maximum input voltage: 500VDC.
- Maximum input current: 100A
- Rated energy: 5120Wh.
- Maximum AC Voltage Range: 170 – 280VAC. voltage: 28.5V.
- Rated output voltage: 120V
- Weight: 250 lbs.
Expand Your Energy Future
Customize the GridGo to meet your long-term energy goals with these powerful options:
Integrated Solar Ready: Choose the separate dolly option equipped with 4–8 prewired 400W solar panels to turn your unit into an off-grid charging solution.
Massive Capacity Expansion: Easily mount Additional Units to the system, allowing you to increase the total capacity up to for extended backup runtime.
In today’s world, reliable power is essential for homes, businesses, and outdoor activities. The Smart Portable Energy Storage System is designed to deliver dependable, clean, and efficient backup power whenever you need it. Built with advanced lithium battery technology, this portable system provides a powerful and flexible energy solution for modern power needs.
Whether you are preparing for unexpected power outages, looking for a solar-compatible backup system, or need a reliable portable energy solution, the Pulsar smart energy storage system ensures uninterrupted power with maximum efficiency.
FAQ
Frequently Asked Question
Does GridGo require professional installation?
The GridGo unit itself does not require professional installation — it operates as a plug-in appliance. Homeowners who want to connect GridGo to their home’s main electrical panel for whole-panel backup should have a licensed electrician install a transfer switch. For extension cord or selective circuit use, no installation is required.
What essential loads can GridGo power?
The 3,000W inverter can handle most home essential loads: refrigerator (150–400W), lighting (50–200W), internet router (10–50W), phone and device charging (50–100W), a small TV (100–200W), and similar loads. High-draw appliances like central air conditioning, electric stoves, and electric water heaters typically exceed the 3,000W rating and are not recommended.
Can I add more units later?
Yes. Additional GridGo units connect to the system and integrate automatically, scaling total capacity up to 10 kWh. Units can be added at any time after the initial purchase.